Description
Some shooters accuse Caesar Guerini of focusing on the cosmetics of our guns. Our reply is ”guilty as charged”. It is our policy to pursue excellence in all aspects of our firearms, both what can be seen and what you experience when you pull the trigger. The Challenger trap shotgun has been designed to appeal to the target shooter with a bold Acanthus leaf pattern on a fine Inglesina scroll background. All of the hand polished coin finished metal surfaces are finished in Invisalloy® protective finish for years of carefree service. Additionally, the new Challenger comes standard with the DTS trigger system that reduces trigger pull weight and creep. The aesthetics of a gun might not be the most important issue, but life is too short to shoot an ugly gun.
Specifications
ModelChallenger Trap Unsingle Challenger Trap Over-and-Under
*Measured from the lowest point of the barrel.
**Weights may vary based on wood density.
Gauge1212
Barrel length 34” (86cm) 32” (81cm)
Avg. Weight**9lbs 8lbs 15ozs
Receiver finishHand polished coin finish with Invisalloy™ protective finishHand polished coin finish with Invisalloy™ protective finish
StockMonte Carlo with DTS 4 way adjustable comb Monte Carlo with DTS 4 way adjustable comb
Stock Finish Hand rubbed oil Hand rubbed oil
Checkering 26 lines per inch26 lines per inch
Recoil Pad Ventilated soft black rubber Ventilated soft black rubber
Chamber 2.75" 2.75"
Top Rib 12mm tapered rib, DTS adjustable from 50/50 to 12012mm tapered rib, DTS adjustable from 50/50 to 90/10
Rib Height*25mm25mm
Center Rib N/A Ventilated
Forcing Cones 5" Long “DuoCon” 5" Long “DuoCon”
Avg. Bore .735, “MAXIS” bore, chrome lined .735, “MAXIS” bore, chrome lined
Chokes3 “MAXIS” competition chokes, M, IM, and Full 5 “MAXIS” competition chokes, LM, M, IM, LF, and Full.
Sight(s)White Bradley style front, Silver center bead White Bradley style front, Silver center bead
Fore-endSemi-beavertail with finger grooves Semi-beavertail with finger grooves
TriggerNew DTS trigger system with two trigger pull weight options, take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release for 12g.New DTS trigger system with two trigger pull weight options, take up, over travel and length of pull adjustments. Factory selective release triggers available in single and double release for 12g.
SafetyManual (Automatic as an option)Manual (Automatic as an option)
AccessoriesStock and trigger wrench, choke case, friction choke wrenchStock and trigger wrench, choke case, friction choke wrench
CasePlastic hard case with fit interior and velvet stock sleeve and barrel sleevePlastic hard case with fit interior and velvet stock sleeve and barrel sleeve
Stock Dimensions
ModelChallenger Trap
All Measurements are subject to change without notice and are based on average measurements. *Measured from the center of trigger adjustment. **With comb in lowest position.
Drop at comb1.5"
Drop at Monte Carlo 1.6"
Drop at heel 2.5"
Comb to grip** 4.75"
Length of pull 14.75"
Cast at heel .12"
Cast at toe .2"
Pitch
Breech to comb 7.5"
Reach *4.1"
MSRP Pricing
ItemDescriptionMSRP
*All Trap models are 12 gauge only. Pricing is subject to change. If your desired configuration is not listed, please contact your dealer for a Special Order.
E3G167Challenger Trap 12g 34" Barrels - Unsingle$7,350
E3G187Challenger Trap 12g 32" 34" Combo - Unsingle$9,895
Additional Charge for Left Hand Stock$235